How To Use

1. Heavy Duty Graffiti Remover – Red (MSDS)

1. Shake bottle well before use.

2. Always test on a small area before applying.

3. Apply to affected area by using a clear bristle paint brush, paper towel or a cloth in a circular motion to penetrate the graffiti. Keep applying for 2 or 3 minutes and do not allow the surface to become dry.

4. Depending on the type of graffiti being removed, wipe off with a damp soft cloth or paper towel. In most instances, spray can graffiti can be removed within one minute. Once removed sponge off using water and detergent.

5. Should stubborn stains remain, repeat steps 3 and 4.

6. Application tools can make a significant difference in product effectiveness and in some cases using a non scratch scrub pad can make removing graffiti easier and more effective.

7. All equipment used can be washed and cleaned up in water.

8. All materials used in the removal of graffiti should be disposed of in a proper and safe manner and in accordance with local laws.

Contains: N-Methyl-2-Pyrrolidone

FIRST AID: For advice, contact a Poisons Information Centre (Phone Australia 13 11 26, New Zealand 0800 764 766).
IRRITANT: Risk of serious eye damage. Irritating to respiratory system and skin. May cause sensitisation by inhalation. Do not breathe spray. Avoid contact with eyes and skin. Wear suitable eye/face protection, gloves and protective clothing.

2. Graffiti-Enz Super Wipes (MSDS)

1. Put on nitrile gloves,

2. Super wipes should be used to remove graffiti such as enamel spray can paint, permanent marker pen, crayon and glue from acrylic painted and smooth surfaces, signs, anti-graffiti film, colorbond, vinyl plastic, perspex and laminate, painted brick, stainless steel and glass. Remember always test on a small area before using.

3. Take wipe from canister and moisten the affected area by wiping in a gentle and circular motion to loosen and penetrate the graffiti. Graffiti should commence dissolving within 30 seconds.

4. Depending on the thickness of graffiti being removed, use another wipe if necessary. Do not allow surface to become dry.

5. Once graffiti has been removed and absorbed within wipe, clean over the treated area with a cloth wet with water or a paper towel.

6. When finished, remove gloves and wash hands with soap and water.

7. Any materials used, including used wipes and gloves should be disposed of in a proper and safe manner and in accordance with Local Council laws.

For best results always try to remove graffiti as quickly as possible and follow the Directions for Use instructions. Graffiti-Enz Super Wipes will loosen and remove graffiti allowing the wipes to absorb and hold the residue from the affected area.

3. Grime-Enz – Stainless Steel & All Purpose Cleaner (MSDS)

1. Mix well before use

2. Always test on a small area before applying.

3. Apply using a trigger spray bottle

4. Spray on surface evenly and leave for 30 seconds. Do not apply to hot surfaces.

5. Activate by rubbing with a damp soft cloth.

6. Wipe off with a clean soft cloth or paper towel to obtain a polished finish.

7. For stubborn stains including rust, use a fine grade nylon pad to remove stain then wipe over with a clean damp cloth or paper towel.

4. Super Strength Graffiti Remover – Black (Commercial use) (MSDS)

1. Shake bottle well before use.

2. Always test on a small area before applying.

3. Apply to dry affected area by using a clear bristle paint brush or a non-scratch pad, in a circular motion to penetrate the graffiti. Keep applying for 2 or 3 minutes and do not allow the surface to become dry.

4. Depending on the type of graffiti being removed, wipe off with a damp soft cloth. In most instances, spray can graffiti can be removed within one minute. Once removed, sponge off using water and detergent.

5. Should stubborn stains remain, repeat steps 3 and 4.

6. Application tools can make a significant difference in product effectiveness and in some cases using a hard scrubbing brush can make removing graffiti easier and more effective.

7. All equipment used can be washed and cleaned up in water.

8. All materials used in the removal of graffiti should be disposed of in a proper and safe manner and in accordance with local council laws.

5. Concrete Cleaner Blue Booster Graffiti Removal (Comercial Use) (MSDS)

1. Shake bottle well before use

2. Apply to affected area by using a hard paint brush or broom in a circular motion to penetrate the graffiti. Keep applying for 2 or 3 minutes until graffiti begins to dissolve.

3. Once graffiti dissolves wash off with water, either by hose or water blaster.

4. Should stubborn stains remain, repeat steps 2 and 3.

5. All equipment used can be washed and cleaned up in water.

6. All materials used should be disposed of in a proper and safe manner, and in accordance with local counsel laws.