How to Use

Heavy Duty Graffiti Remover (Red Label)

1. Shake bottle well before use.

2. Always test on a small area before applying.

3. Apply to affected area by using a clear bristle paint brush or a gentle scratch pad, in a circular motion to penetrate the graffiti. Keep applying for 2 or 3 minutes and do not allow the surface to become dry. Surface to remain dry as product may be ineffective on wet surfaces.

4. Application tools can make a significant difference in product effectiveness and in some cases to remove stubborn/hard to remove graffiti it may be necessary to use a stiff brush or a light abrasive scourer to remove the graffiti quickly and more effectively.

5. Depending on the type of graffiti being removed, wipe off with a damp soft cloth or paper towel. In most instances, spray can graffiti can be removed within one minute. Once removed, sponge off using water and detergent.

6. Should stubborn stains remain, repeat steps 3 and 4.

7. All equipment used can be washed and cleaned up in water.

8. All materials used in the removal of graffiti should be disposed of in a proper and safe manner and in accordance with local council laws.

Contains: N-Methyl-2-Pyrrolidone

FIRST AID: For advice, contact a Poisons Information Centre (Phone Australia 13 11 26, New Zealand 0800 764 766).

IRRITANT: Risk of serious eye damage. Irritating to respiratory system and skin. May cause sensitisation by inhalation. Do not breathe spray. Avoid contact with eyes and skin. Wear suitable eye/face protection, gloves and protective clothing. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Top of page

Back to How to Use page
 

Site Map

OneBioSci Pty Ltd trading as Graffiti-Enz
ABN: 60 093 947 598
Address: PO Box 1029, New Farm, Queensland, Australia 4005
Telephone: 61 7 33583561 | Facsimile: 61 7 33585881
Email: admin@graffiti-enz.com.au